Maytag Atlantis Washer Manual Remove Agitator From Ge
Most Maytag washers have an agitator that lifts directly out. These models have a rubber stop ring around the agitator shaft at the bottom of the splines. The agitator feels like it 'snaps' onto the shaft. A few models had a set screw that must be loosened before removing the agitator. If the washer is not agitating, remove the agitator. How a washer works, good to read this first; How does the agitator come off my washer? Some Maytag washers have a fuse in the fill valve circuit, if this fuse let go the. Agitators; Maytag Dependable Care style washer agitator; Maytag Atlantis. Remove agitator cap by pulling it off and look for a bolt, remove the bolt.
General Washing Machine Information Always remember Electricity is dangerous and should be treated with respect. Please pick a topic by problem.hope you find this helpful:-) • • • • • • • • • • • • • • • • Washer Basics: Filling with water: The water fill valve - The water is a mechanical and electrical part, the coils on the valve need electricity to mechanically open the valve to allow the water to flow into the washer.myth.the washer pumps water into itself.no, it does not. The fill valve opens and the house water pressure pushes the water into the washing machine. No cold water or no hot water: The fill valve has two coils, one for the hot water and one for the cold water. It is possible that one of the coils can fail and you loose that filling ability.
The 1st time that you strategy a girl with romantic purpose, make your conversation fast. Free download adidas 316l watch manual programs for kids. And Finallyhellip.
If the cold water coil quits, the hot will still work and during warm fill you will get hot water only and during a cold fill you will get no water at all. If the hot coils quits, you will still have cold water fill, cold water only on a warm setting and no water on a hot fill setting. You can No cold water or no hot water - The fill valve has two coils, one for the hot water and one for the cold water. It is possible that one of the coils can fail and you loose that filling ability. If the cold water coil quits, the hot will still work and during warm fill you will get hot water only and during a cold fill you will get no water at all. If the hot coils quits, you will still have cold water fill, cold water only on a warm setting and no water on a hot fill setting.
You can for 120 volts, power to a fill valve coil and no fill = a bad fill valve. You can also, no continuity = a bad fill valve. Some Maytag washers have a fuse in the fill valve circuit, if this fuse let go the washer will not fill.
Fill valves can also from time to time stick open and not stop filling. If you have to shut off the fill valves to stop the water from filling in the washer, you have a bad fill valve and you will have to replace it. Water level controls: The is also know as a pressure switch, this is where you set the water level ( small - medium - large ).